Automatic Bar-Tack And Darning - Singer SE300 Manual De Instrucciones

S
EWING

AUTOMATIC BAR-TACK AND DARNING

No. 16 Bar-tack, to reinforce areas that will be subject to strain,
such as pocket corners.
No.17 Darning, mending and other applications.
length of the bar-tack or darning to be sewn.
bring upper thread to the left.
3. Position fabric under presser foot so that the starting point
is on the thick area.
Lower the foot.
b. When sewing the bar-tack on the edge of thick fabric, such
as a pocket, place a cardboard or fabric piece of the same
thickness beside the fabric to help keep the foot level as
you sew.
4. Lower the Buttonhole Lever completely.
NOTE:
Machine will not start to sew if Buttonhole Lever is not
lowered properly or buttonhole foot is not positioned
correctly.
5. Hold upper thread lightly and start the machine.
6. Machine will sew bar-tack or darning stitch, as shown.
1
7. Press the Thread Cutter button and raise the presser foot
lifter to remove the fabric.
31
2 3 4
1 2