ClearSounds CSC1000 Manual De Uso página 26

2. Press the Prog key, the display will show "--->?"
3. Press one of the Memory dial keys, the display will show
"Saved".
4. Repeat for each Memory dial key you want to use.
After storing the 8 Photo Memory Numbers, you may want
to utilize the Memory Card to write down the name or phone
number that corresponds with each Photo Key. The Memory
Card is located on the right side of the phone.
Dialing from Memory Numbers
1. In standby mode, press one of the memory dial keys,
the display will show the corresponding number. If you
selected the wrong memory dial, either select the correct
memory dial or press the Clear soft key repeatedly until
you get back to the main screen.
2. Lift the handset or press the Speaker key and the phone
will begin to dial.
NOTE: Press and hold any memory key for two seconds and the
speakerphone will turn on and automatically dial.
NOTE: Entering a new number in the same location will
automatically erase the previous number.
We suggest that you program the emergency number with your
local Police Station, Fire Station, Doctor or Hospital. DO NOT
PROGRAM 911 into any memory keys.
Clearing Memory Numbers
1. Press the Prog key in standby mode, the display will show
"--->?".
2. Press the desired Memory dial key that you want to delete
and then the display will show "Saved". This means the
number has been cleared.
26 – ENGLISH