Intelliflo Drive Assembly And Control Panel; Operator Control Panel Features - Pentair Water Pool and Spa IntelliFlo VF Manual Del Usuario

IntelliFlo VF Drive Assembly and Control Panel
The IntelliFlo drive consists of an operator control panel and system electronics that convert the incoming
230 volt single phase power to 3 phase variable frequency to drive the motor. The drive microprocessor
controls the motor by changing the frequency of the current it receives together with changing the voltage
to control the rotational speed.
Operator Control Panel,
buttons and Liquid Crystal
Display (LCD)

Operator Control Panel Features

• Backwash and Rinse
• Vacuum — Can be preset using duration and fl ow parameters to save energy
— Allows pump to run at peak effi ciency, saving users up to 90% in energy cost, based on
• Filter
a pool size up to 55 m
— Ten feature modes can be programmed to control fi ltration duration, start and stop
• Feature
time, and frequency for cleaners, water features, spas, and waterfalls
— Allows the user to override all programming and run the pump using RPM or fl ow
• Manual
3
(m /h) control parameters
IntelliFlo VF Drive Assembly
— Informs the user when and how to backwash fi lter media
3
(15,000 US gallons), one turn per day with a 24 hour cycle
IntelliFlo VF Installation and User's Guide
9