Manual Flow Mode; To Adjust The Speed And Flow - Pentair Water Pool and Spa IntelliFlo VF Manual Del Usuario

Manual Mode (Continued)

Manual Flow Mode

4. Press the Start/Stop button to stop the pump. Use the Up and Down arrow buttons to scroll to the
"Set FLOW" menu item. Press the Select button to select it.
5. To change the setting, press the
the Up and Down arrows to change the selected digit.
6. When you are done, press the
Escape button to exit edit mode without saving.
MANUAL FLOW
15.W 15.W
POWER
RUNNING
7. Press the Start/Stop button. If you pressed the
appear in the top left corner of the display, indicating that the pump is now in Manual Flow Mode.
8. Use the Up and Down arrow buttons to view the screens below:
• POWER
• ACTUAL SPEED
• FLOW
• Set SPEED
• Set FLOW
to change speed to manage the fl ow rate based on system changes
Note: IntelliFlo's sensors—with the exception of the fl ow sensor— will not work in Manual Mode, so
warning alarms, such as the Suction Blockage alarm, will not operate.

To adjust the Speed and Flow:

1. Be sure that the green power LED is on.
2. Press the Manual button (LED on).
3.
a) To set the speed:
Press the Select button to select it. The fl ow values can be set from 4 to 29 m
(default 12m
Left and Right arrows to select which digit to modify, then use
Enter button to save the changes. To cancel any changes, press the
® ®
12:15 MANUAL FLOW 12:15
1700.RPM 1700.RPM
ACTUAL.SPEED
RUNNING
(Watts): Displays power to the motor shaft in continuous watts
(RPM): Displays pump speed in RPM
3
(m /h): Displays actual fl ow as long as the IntelliFlo is in Manual Flow Mode.
(RPM): Allows you to set IntelliFlo to run at a continuous pump speed
3
(m /h): Allows you to set IntelliFlo in Manual Flow Mode to allow the pump
Use the Up and Down arrow button to scroll to the "Set SPEED" screen.
3
/h). To change the setting, see step 4 below.
®
MANUAL FLOW 12:15 MANUAL FLOW
14m³/h 14m 1000.RPM 1000.RPM
FLOW Set SPEED
RUNNING RUNNING
Enter button in step 6, "MANUAL FLOW" will
® ®
12:15 MANUAL FLOW 12:15
14m³/ ³/h
Set FLOW
RUNNING
3
per hour
IntelliFlo VF Installation and User's Guide
15