Pentair Water Pool and Spa IntelliFlo VF Manual Del Usuario página 13

Controls and LEDs (Continued)
9 Arrow buttons:
• Up arrow: Move one level up in the menu tree or increase a digit when editing a setting.
• Down arrow:
• Left arrow:
• Right arrow:
10 Feature 1 button:
11 Feature 2 button:
12 Start/Stop button:
mode to start automatically.
13 Reset button: Reset alarm or alert.
LEDs
{
On: This green, power LED is on when IntelliFlo is powered on.
Warning: This LED is on if a warning condition is present.
14
Alarm: This LED is on if an alarm condition has occurred.
Control Panel LCD Display
15
LCD Display Lines:
• Line 1 - Mode and time
• Line 2 - Data
• Line 3 - Name of data in line 2
• Line 4 - Run status
Line 1
Line 2
15
Line 3
Line 4
14
10
11
Move one level down in the menu tree or decrease a digit when editing a setting.
Move cursor left one digit when editing a setting.
Move cursor right one digit when editing a setting.
Starts Feature 1 mode. The LED is lit when mode is active.
Starts Feature 2 mode. The LED is lit when mode is active.
Start or Stop the pump. When the LED is lit it indicates that the pump is currently running or in a
FILTER 12:15
15.W 15.W
POWER
RUNNING
®
13
12
IntelliFlo VF Installation and User's Guide
11
9