Selector Locking Function; Safety Systems - Zummo Z14 Manual Del Usuario

7

SELECTOR LOCKING FUNCTION

In order to lock the SELECT button to avoid unwanted changes of the number of fruits to
squeeze, carry out the following operations:
Select the number on the display you wish to lock.
Press the button ON and wait until the machine stops.
Switch off the machine using the power switch.
Being the machine switched off, press and hold STOP.
Switch on the power keeping STOP button pressed for four seconds.
The display will show a four digits number.
Use the buttons SELECT and ON to select the number 7437.
Press STOP and the display will show - - - -
Turn off the machine using the power switch. If you fail to do this, the display will keep
showing the message - - - -
Switch on the machine. Now the SELECT button is locked and the display will show Lock.
To unlock the SELECT button, repeat exactly the same operation.
8

SAFETY SYSTEMS

The machine has various safety systems:
If the Front Cover is not assembled or is improperly assembled, the display will
1
show message Error with the Front Cover and Hopper symbols flashing.
If the Juicetray is not assembled or improperly assembled, the machine will not
2
operate and the display will show Error message. The tray flashes as a shadow.
If for any reason the machine gets blocked during operation, after a few seconds
3
the motor will stop automatically and the display will show Error message with a
faulty flashing icon, until the cause of the blockage is removed.
Thanks to a thermal protection system in the motor, in the event of overheating the
4
machine will stop and the display will show Error message and a thermometer icon.
In this case, please wait around 10 minutes to allow the motor temperature to
decrease. The error message will disappear. Please check that the ventilation
gratings are not obstructed.
If there is no message on the display, it means there is no power supply. Check that
5
the power switch is on and that the plug fuse is not burnt out (Fig.16).
17