Cleaning The Feeder; Important Notice; Machine Accessories; Attachments - Zummo Z14 Manual Del Usuario

The display will show the number of oranges to be squeezed. The machine is now ready for
operation.

Cleaning the feeder

Unscrew the Nut located inside the basket. (Fig. 13)
Remove the Hopper Fruit Classifier pulling it upwards. (Fig. 14)
Remove the Hopper Basket pulling it upwards until it is completely removed from the shaft.
(Fig. 15)
Remove the Hopper Track.
Clean all parts with soapy water or using a dishwasher machine.
Reassemble the parts as follows:
Assemble the Hopper Track,
Fit the Hopper Basket onto the shaft ;
Turn the Hopper Basket clockwise until it gets locked. The pins should have entered their
respective holes.
Assemble the Hopper Fruit Classifier into the Hopper Basket until it gets locked into place.
Screw the Basket top nut.

Important Notice

The normal use of the machine may cause the plastic parts that are exposed to juice to turn orange
colour. This is completely normal and does not imply a hygiene problem or affect the physical
properties of the plastic.
10

MACHINE ACCESSORIES

The machine has various squeezing sets of Cups, Balls and Fruit Classifiers to use depending
on the size of the fruit you wish to squeeze.
Dark-coloured Cups and plus Hopper Fruit Classifier Balls for fruits with
a
diameters between 55 and 75 mm (Fig.18).
Bright-coloured Cups and Balls plus Hopper Fruit Classifier for fruits with
b
diameters between 70 and 90 mm (Fig. 17).
Very bright-coloured Cups and Balls plus Hopper Fruit Classifier for fruits with
c
diameters between 53 and 60mm (Fig. 19) (Optional set not included with the
machine)
Regardless of the squeezing set use, the Blade will always be the same.
ATTENTION!: Never mix components of different sets.
11
MACHINE MAINTENANCE
Exterior machine maintenance: Consists on just daily cleaning.
Interior of the machine: After every 600,000 cycles, the inner machine guides and springs must
be lubricated and a full cleaning carried out.
19