The Evencare G2 Test Strip - Medline Evencare G2 Guía De Usuario

2
EVENCARE G
The EVENCARE G2 Blood Glucose Test Strip
Contact Points
Insert this end into the test strip
port on the top of the meter.
The EVENCARE G2 Test Strips are glucose specific, biosensor-based
test strips that require very little blood sample to quickly test glucose in
fresh capillary whole blood. The test results are plasma-calibrated for easy
comparison to lab results, however results may be 10% to 15% higher than
results obtained from whole-blood referenced blood glucose assays. The
test strip is also equipped with under-fill detection to alert you when there
is not enough blood to perform a test, so you can be assured that every
reading you get is an accurate and meaningful result.
IMPORTANT:
• Immediately close the vial cap of the test strip bottle tightly after
each use. Keep the unused test strips in the original bottle.
• DO NOT leave any test strips outside the bottle while not in use.
• DO NOT reuse test strips.Test strips are for single use only.
• Carefully discard used test strips and lancets in proper
waste containers.
12
Understanding Your New Blood Glucose System
EVENCARE
2
G
®
™
Sampling End
Apply blood or control
solution here.