Medline Evencare G2 Guía De Usuario página 17

Step 8: Set Minute
The current minutes will flash. If the voice function
is on, the meter will say, "Set minutes." Press ▲or▼
to select the correct minutes. Press Enter (
confirm your choice and finish setting the clock.
NOTE:
• Anytime during set up, inserting a EVENCARE G2 Test Strip will
begin testing. Any changes made so far are stored.
• You may need to reset the time after changing the batteries.
After date and time have been set, the meter will announce
the date and time if the voice feature is on. Begin testing by
inserting an EVENCARE G2 Blood Glucose Test Strip (see page
32, Testing Your Blood Glucose), or press and hold Enter (
to turn off the meter, or see the next section on how to
set up the alarm feature on your meter.
Setting Up Your New System
PM
mem
PM
mo /dL
PM
mem
) to
PM
mo /dL
ctl
PM
EVENCARE G
PM
mem
mg/dL
DAY
AVG
)
17
2
mem