Medline Evencare G2 Guía De Usuario página 28

2
EVENCARE G
IMPORTANT:
• Check the expiration date printed on the test strip bottle. Do not use
expired test strips.
• Use each test strip immediately after removing it from the bottle.
• Do not use wet or damaged test strips.
• Keep test strips away from direct sunlight and heat. Store the test
strip bottle in a dry, cool place.
• Record the "date opened" on the bottle label. Discard the bottle
and any remaining test strip after 6 months from date of opening.
• Test within the temperature range of 50˚F to 104˚F.
Your meter will not work outside these ranges.
• Insert the test strip properly.
• The flashing blood drop icon will appear once the test strip has been
fully inserted.
Step 2:
Wait until the flashing blood drop and arrow
icons appear on the meter display screen. The meter
will also announce, "Please apply blood
onto the test strip" if you have the voice feature
turned on. Press
control solution testing.
Step 3:
ctl icon will appear next to the test strip icon and L1 will appear on the
meter display screen. The meter will also announce "L1 control solution
test, please apply control solution onto the test strip." If you decide not to
do a control solution test, press
the meter display.
Step 4:
Squeeze a drop of Low control solution onto a clean, dry, nonabsorbent
surface. Do not apply control solution to the test strip directly from the
control solution bottle. Replace the bottle cap on the control solution
bottle immediately after use.
28
Control Solution Testing
t one time
to enter L1 (LOW)
t two times
mo /dL
ctl
PM
code code
mem
PM
mem
PM
mo /dL
PM
and ctl will disappear from
mo /dL
ctl
PM
mem
PM
mo /dL
ctl
PM
code
mem