Features; Dimension - koban KDP-DALI 01 Manual De Instrucciones

Features

•
Integrated sensor and power
box in one unit and using the
spring clamps for easy and quick
installation.
•
A constant light control is
enabled with the auto/manual
dim function to provide an easy
and cost effective solution for
energy saving.
•
Light fades off function as a
warning before switching off.
•
To enlarge the detection range
by connecting the slave detector
to master detector, max. 10pcs
slave detectors can be
connected.
•
Can be programmed by IR
remote control for easy and
quick settings, especially to
provide alternative function of
auto / semiauto mode
(note: The IR remote control is
strongly
recommended to
•
The ambient Lux value can be
learned as the threshold for
switching on / off the loads by
IR or VR if the pre-set Lux value
does not match user's
requirement.
•
A red LED is equipped as an
indicator for test triggering and
IR setting.
Compliant with International
•
DALI IEC62386 Standard
protocol.
www.grupotemper.com
Presence detector for DALi lighting control
purchase).
•
With DALI outputs control
lighting system in their
corresponding areas, all
connected devices share the
same broadcast address.
and there is no need to assign
address to every device.

Dimension

KDP-DALI 01/KDP-DALI 01-C:
Φ 75 x 82,9 mm (See FIG.1)
• Without Cable clamp
Φ75
• With cable clamp
(for optional purchase)
Φ60
• RC DALI Remote control
(optional purchase)
RC DALI
50
FIG.1
Manual de instruções |
KDP-DALI 01
Φ60
8
29