Standard Output Format; Custom Output Format - Adam Equipment Nimbus NBL Serie Manual De Instrucciones

11.2.2

STANDARD OUTPUT FORMAT

The balance will print the following data as the standard form. The standard form cannot
be changed. The format of the custom forms #1 and #2 will be the same as the standard
form until modified by the user.
This will result in a printout that looks like:
NOTE: The format of the result line will change depending on the mode in which the
balance is operating, e.g.
Normal weighing, Animal weighing: "123.456 g"
Parts counting: "1234 pcs"
Percent weighing: "12.345 %"
Density: "12.345 g/cc"
11.2.3

CUSTOM OUTPUT FORMAT

If output on demand is selected, the user may optionally configure the serial output as a
choice of 3 styles of form, either in a default format or in one of two custom formats. Each
of the custom formats can be configured to output up to 15 lines of data. The data types
that can be printed are:
NAME
ID number
Serial number
Date
Time
Net weight
Gross weight
Tare weight
Unit weight
Count
Reference weight
Percent
Checkweigh lower limit
Checkweigh upper limit
A blank line printed
© Adam Equipment Company 2017
Line 1 Date
Line 2 Time
Line 3 Blank line
Line 4 ID number
Line 5 Blank line
Line 6 Result
Line 7 Blank line
Line 8 Blank line
Date: 23/09/04
Time: 15:45:27
ID No: 123456
Net: 123.456 g
TEXT PRINTED
ID no.: xxxxxxxxxxxx
Serial no. xxxxxxxxxxxx
DATE dd/mm/yyyy
TIME hh:mm:ss
Net: xxx.xxx g
Gross: xxx.xxx g
Tare: xxx.xxx g
Unit wt: xxx.xxx g
Count: xxxx pcs
Ref. wt: xxx.xxx g
Percent: xx.xxx %
Low: xxx.xxx g
High: xxx.xxx g
<CR><LF> only.
30