Hoshizaki KM-520MAJ-E Manual De Instalación página 6

12) Clean the dispenser unit/ice storage bin liner using
a neutral cleaner. Rinse thoroughly after cleaning.
13) Replace the base cover in its correct position. Move
the control switch to the "ON" position. Replace the
front panel in its correct position.
14) Turn on the power supply to start the automatic
icemaking process.
8. Bin Control Adjustment
WARNING
• All parts are factory-adjusted. Improper
adjustments may adversely affect safety,
performance, component life, and warranty
coverage.
• In Hoshizaki DB and DM dispenser
applications, the bin control controller
setting must be adjusted to 2.
For Coca-Cola Freestyle
non-Hoshizaki dispenser applications,
the bin control controller setting must be
adjusted to 3. Increasing the ice level on
any dispenser application could lead to
icemaker movement, water leakage, or ice
overflow.
NOTICE
• Do not block the bin control lens with
top kits or the icemaker will not operate
properly.
• Failure to properly adjust the bin control
setting could result in water leakage, ice
backup, and icemaker damage.
Recommended Setting for
Hoshizaki DB or DM Dispenser
Factory Default for
Standard Ice Storage Bins
Bin Control
Controller
Dispenser and
®
Recommended Setting for
Coca-Cola Freestyle Dispenser
®
and Non-Hoshizaki Dispensers
Model Shown:
KM-660MAJ-E with B-300SF
Fig. 7
The bin control is factory set for use on Hoshizaki
America standard ice storage bins. See the table
below for adjustments to ice level.
WARNING! Do not increase ice level above the
table settings below. Higher ice levels could lead
to icemaker movement, water leakage, or ice
overflow.
1) If not already removed, remove the front, top, and
right side panels.
2) Confirm bin control controller setting for proper
application. See the table below for settings.
Factory default is 1 for standard ice storage bins.
See Fig. 7 for ice level reference.
Return to step 3 in "I. 7. Startup" above.
Application
Bin Control
Controller
Setting
Default: Standard Ice
Storage Bins
Hoshizaki DB and DM
Dispensers
Coca-Cola Freestyle
®
Dispenser and
Non-Hoshizaki
Dispensers
Optional Settings
6
Bin Control Ice
Level Settings
Ice Detection
Distance
From Bin
Control Lens
1 254 mm (10")
2 305 mm (12")
3 406 mm (16")
4 508 mm (20")
5 610 mm (24")
Bin Control Lens
Setting #1
Setting #2
Setting #3
Setting #4
Setting #5