Oven Controls, Clock and
Timer
(continued)
Clock
(on models
with press pads)
The clock must be set for the automatic
oven timing
functions
to work properly° The time of day cannot be
changed
during
a Timed
Baking
or a Self-Cleaning
cycler
To Set the Clock (on
models with press
pads)
1. Press the CLOCK
pad
2. Press the UP or DOWN
pad to set
the time of day,
3, Press the CLOCK
pad to start
Timer (on
models
with press pads)
The timer is a minute
timer only;
it does not control
oven operations,,
The maximum
setting
on the timer
is 24 hour&
To Set the Timer
(on models with press pads)
1_ Press the TIMER ON/OFF
pad°
2. Press the UP or DOWN
pad to set
the amount of time on the timer,,
To set the timer
one minute
at a
time, tap the pads. To set the timer
ten minutes
at a time press and hold
the pad.
The
timer
will
start
automatically
within
a few seconds
of releasing
the UP or DOWN pad,
To Reset the Timer (on
models with press
pads)
Press the UP or DOWN
pad until the desired
time
is set.
To Cancel the Timer
(on models with press pads)
Press the TIMER
ON/OFF
pad until the time remain-
ing is cleared
Power Outage (on
models
with press pads)
When
power
is restored,
you
will
need
to reset
the clock.
All other
functions
that were
in operation
when
the
power went out will have to be programmed
again,
End of Cycle Tones
(on models with press pads)
The
end of cycle
tone
is a series
of three
beeps.
Reminder
beeps continue
until the oven is turned off.
12