Guinaz M2710D Guia De Instalacion página 2

CARACTERÍSTICAS Y FUNCIONAMIENTO.
DESCRIPCIÓN. DESCRIPTION.
CHARACTERISTICS AND FUNCTIONING.
Video entryphone (black and white or colour) installation for
several dwellings with call confirmation in the street panel and
automatic start-up of the monitor.
Its functioning and installation are simple.
The steps for installation are shown in the different sections,
with a street panel offering several adjustments for each type
of installation, such as the position of the camera, sound volume,
etc.
The monitor also provides image adjustments to adapt this to
light requirements and the lack of light.
The type of installation is that known as 5 + n + coaxial cable
or twisted pair for the video signal, where “n” is the number of
calls.
It works in the following way:
In this guide, you will be informed on how to perform alterations,
such as adding other supplementary telephones and monitors
or even the easiest way of distributing the video signal.
1.
On/off push-button.
2.
Door opener push-button.
3.
calle y monitor, siempre y cuando el monitor se haya encendido previamente.
Communication pushbutton.
the street panel and the monitor, as long as the monitor has been previously turned on.
4.
Supplementary push-button.
entryphone installation (lighting of stairs, opening a second door...). Potential-free contact.
5.
Brightness adjustment.
6.
Contrasts/Colour adjustment
on the screen.
1. When receiving a call, the image appears instantly on your
monitor.
2. While you see the visitors, these are not warned about your
presence in the dwelling until audio contact is established.
3. To establish audio contact press the communication button
. The monitor must be on, due to a call or video
surveillance, for audio to be activated. It will not be necessary
to keep communication button pressed down once this
has commenced.
4. The communication will be disconnected after 40 seconds,
or by pressing the on/off button
5. The door is opened by pressing the door opener pushbutton
.
6. To perform video surveillance, press the on/off button
Video surveillance will automatically end 40 seconds after
it is initiated, or by once again pressing the on/off button
.
7. For other applications it has a supplementary potential-free
pushbutton .
8. It has brightness and contrast/colour
achieve an appropriate image quality.
Used to connect and disconnect the monitor.
This is pressed to open the door.
Sirve para establecer comunicación audio entre placa
This is used to establish audio communication between
Used for functions other than those of the video
To adjust the brightness of the image appearing on the screen.
. To adjust the contrast/colour of the image appearing
.
.
adjustments to
.