Guinaz M2710D Guia De Instalacion página 3

INSTALACIÓN PLACA CALLE.
1
Assembly the flush
mounted box.
4
Put the upper frame in
place and tighten both
screws.
6
bis
screw and loosen the left one.
Move the street panel 1.5 mm to the right and the front.
8
Ajuste del volumen de placa calle y de
monitor (1). Ajuste posición de la telecámara
(2).Configurar puentes telecámara
(consultar página 10).
Adjustment of the street panel and monitor
audio volume (1). Adjustment of the
camera position (2). Configure camera
bridges (see page 10).
INSTALLATION OF THE STREET PANEL.
2
Separate the covers, loosen both screws and
extract the joints of the modules.
5
Attach the
street panel using
two screws.
To open towards the left.
Open the street panel.
9
THE STREET PANEL.
3
Insert modules and joints in the same order
as in the figure.
6
left screw and loosen the right one.
Move the street panel 1.5 mm to the left and the
front.
7
Unscrew right
audio control group, the name tag pushbutton
groups and the camera group according to
the single wire diagram.
COVERS BEFORE CLOSING
To open towards the right.
Unscrew
Open the street panel.
Connection of the
10
Close the street panel
by tightening both
screws.