Operating Instructions; Proper Use; Assembly - Brill 40 BHR Manual De Instrucciones

4. Notes on these Operating Instructions
Please carefully read the operat-
ing instructions and adhere to the
GB GB
general and safety instructions
enclosed therein. Use this operat-

5. Proper Use

The Brill lawnmower is intended
for cutting lawns and areas of
grass in domestic gardens and
allotments and not for commer-
cial use in public areas, parks,
sports stadia, on streets and in
agriculture and forestry.
Adherence to the instructions for
use enclosed by Brill is a precon-
dition for the proper use of the
equipment. The instructions for
use also include the operating,
care and maintenance instruc-
tions.

6. Assembly

Checking all the Parts are Included
The box contains the following
parts:
Complete lawnmower
.
Grass collecting bag
.
Spark plug spanner
.

Operating instructions

.
Fitting the Guide Handle
Remove your lawnmower from
the box, unfold the z-shape fold-
ing guide handle and tighten the
clamping grip (fig. A, item 1).
Adjust the guide handle to the
desired height and tighten
securely in place on the left and
right using the joint clamping
handle (fig. A, item 2).
Warning! Make sure you
A
do not trap the Bowden
cables (fig. A, item 11 ).
18
ing manual and the safety instruc-
tions in order to familiarise your-
self with the implement, the adjust-
ing parts and the correct use.
Warning! The mower must
A
not be used for trimming
bushes, hedges and herbaceous
plants, for cutting and chopping
weeds or for mowing lawns on
rooftops or in balcony boxes
because of the risk of physical
injury. Moreover, the machine
may not be used as a shredder
for cutting up tree and hedge
trimmings or for rolling out
uneven areas of ground.
Warning! Never allow chil-
A
dren or other people who
Attaching the Starter Cable
Press the safety handle (fig. A,
pos. 4) to release the motor
brake. Pull out the starter handle
at the motor and attach the
starter cable in the bracket on
the frame from below.
Assembling the grass collecting
bag
Figure B – F
The grass collecting bag is sepa-
rately (3 parts) included in the
packaging.
1. Fold the collecting bag (3) out
and insert the bearing rod (5)
through the grass collecting
rod opening (3), so that the
plastic base is at the bottom.
2. Now bend the mounting
straps (6) up by hand as
Keep these operating instructions
in a safe place.
are not familiar with these oper-
ating instructions to use this unit.
Never mow your lawn if other
people, especially children and
pets are nearby.
Local regulations may specify
a minimum age for users of this
type of gardening equipment.
Remember that the user or
operator is responsible for all
accidents that occur involving
other people or their property.
shown in fig. C and use them
to mount the grass collecting
bag (3) on the bearing
rod (5) as shown in fig. D.
3. Brace the carrying handle (4)
by pressing the bearing rod (5)
together as shown in fig. E.
The assembled grass collect-
ing bag is shown in fig. F.
Note:
The bearing rod (5) is bent in
at the spot where the carrying
handle (4) is attached.
Protection of the environment,
disposal
The packaging
material is made of
recyclable materials.
Dispose of packaging
materials in accordance with
regulations.