Calibration - Giropes Baxtran SL Manual De Usuario

BACK

8. CALIBRATION

Press key to turn on the scale. Press
until display will be shown f0 bl
key during that start up until display show tech
Press
key to confirm and display will be shown p1 cal
Press
Press key , display will be shown current calibration weight value.
If necessary press
show load
Place the test weight on the platform
Once the stable indicator is shown on the display, press
and following power will be off
28 28
CPA
OIML
APPROVE
NTEP
NONE
P1 CAL KG LB
3000
P2 RES 6000
60000
6KG
P3 CAP 15KG
30KG
P4 GRA
P5 AUTO 0 \ 2 \ 4 \ 10 \ 20 \ 50 \ 100
P6 RAGE 0 \ 2 \ 4 \ 10 \ 20 \ 50 \ 100
P7 AZN 0. 5D \ 1D \ 12D \ 14D
P8 STA ON \ OFF
key during that start up
key to shift location,press
3000R 3000 I
/ /
15000 30000
/ /
key to change the value ,press
key, display will be show PASS.
USER'S GUIDE SL
CPA approval
OIML approval
NTEP approval
None approval
Calibration (For NTEP approval version,it can
be calibrated in kg or lb mode)
Set external resolution
For approval version,it only show
/ resolution
3000R 3000 I
Set Scale Capacity
Set the local gravity
Initial zero setting range (only can be set in
non-approval version)
Zero setting range (only can be set in non-
approval version)
Set zero-tracking (only can be set in non-
approval version)
Set pre tare function on/off
Back to weighing mode
key to confirm,display will be
EN EN
/
3000