KTM Power Parts 77112946044 Manual De Instrucciones página 12

12
- Remove the clutch cover (1).
1
- Remove the five clutch springs (2), pressure cap (3), lining disks, inter-
mediate discs and pressure piece.
2
3
- Mount the special tool (4) (clutch holder 50329003000) on the outer clutch
hub and remove the nut (5) and the tab washer (6).
7
6
5
4
- Pull off the outer clutch hub (7).
Assembly
Mounting the Sport and Race Kick-Start Kits
- Mount the stop plate (8) (included) with the hex collar screws M6x16 (9)
8
(included) (10Nm, Loctite 243).
NOTE:
Remove the existing screws first.
9