KTM Power Parts 77112946044 Manual De Instrucciones página 16

16
1
1
3
4
7
6
Further assembly steps for Race Kick-Start Kit
- Remove the seat.
- Remove the filter box cover.
- Remove the air filter.
- Disconnect and remove the battery.
- Remove the battery box.
- Disconnect the plug-in connections (1) and mount the Kick-Start wiring
harness (2) (included).
2
- Remove the starter cable from the starter (3).
- Remove starter screw (4).
- Remove the start number plate, disconnect the plug-in connector (5) and
remove the start button from the handlebar.
- Mount the start number plate.
5
- Remove the wiring harness.
- Remove the shift lever (6).
- Remove the torque limiter cover (7).
- Remove the torque limiter (8).
8