Installation Information; Installation And Lp Cylinder Specifications And Safe Use - Brinkmann 810-1100-S Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

a) DO NOT store a spare LP gas cylinder under or near this appliance.
b) Never fill the cylinder beyond 80% full.
c) If the information in (a) and (b) are not followed exactly, a fire causing death or
serious injury may occur.
FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as a garage, shed
or breezeway.
Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to
prevent dangers associated with gas accumulation and toxic vapors. Although minimum clearance is
36 inches (91 cm), we strongly recommend that you do not operate this appliance within 10 ft. (3.0 m)
of any structure, combustible material or extra LP gas cylinders not attached to the appliance. Not
adhering to these clearances will prevent proper ventilation and may increase the risk of a fire and/or
property damage, which could also result in personal injury.
Maintain a minimum clearance of 36 inches (91 cm) between all sides of grill, deck railings, walls or
other combustible material. DO NOT use grill under overhead unprotected combustible construction.
DO NOT use or install this grill in or on a recreational vehicle and/or boat.

INSTALLATION INFORMATION:

The installation of this appliance must be in accordance with:
All applicable local codes, or in the absence of local codes, either:
National Fuel Gas Code ANSI Z223.1 NFPA 54
Natural Gas and Propane Installation Code: CAN/CGA B149.1
Natural Gas Installation Code: CAN/CGA B149.1 (Canada)
Propane Installation Code: CAN/CGA B149.2 (Canada)
To check your local codes, see your local LP gas dealer or natural gas company. This grill was not
intended to be connected to a natural gas supply line. If an external electrical source is utilized, it
must be electrically grounded in accordance with local codes, or in the absence of local codes, with
the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA 22.1.
The LP-gas supply cylinder to be used must be constructed and marked in accordance with the
specifications for LP-gas cylinders, U.S. Department of Transportation (DOT) or the Standard for
Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods, CAN/CSA-B339.
INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:
NOTE: Your grill is designed to operate with a 16.4 oz (DOT 39 cylinder) that is about 7 3/8" high.
1. Check that the regulator control valve is off.
2. Hand tighten propane cylinder to regulator control valve.
3. Attach regulator to grill. Hand tighten securely.
DANGER
WARNING
4

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido