Bosch 40 Instrucciones De Instalación página 4

Important Safety Instructions
,
READ AND SAVE THESE INSTRUCTIONS
Safety Codes and Specifications
• Be sure your appliance is properly installed and
grounded by a qualified technician in accordance
with the National Electrical Code ANSI/NFPA No. 7
latest edition and local electrical code requirements.
• Local codes vary. Installation, electrical connections
and grounding must comply with all applicable codes.
• This appliance has been tested in accordance with
- CAN/CSA C22.2 No. 61 - Household Cooking Ranges
- UL 858 - Household Electric Ranges
It is the responsibility of the owner and the installer
to determine if additional requirements and stan-
dards apply in specific installations.
Equipment and Usage Safety Requirements
• Unit is heavy and requires at least two persons or
proper equipment to move.
• To eliminate the risk of burns or ire by reaching over
heated surface units, cabinet storage space located
above the surface units should be avoided. If cabi-
net storage is provided, the risk can be reduced by
installing a range hood that projects a minimum of 5"
(12.7 cm) beyond the bottom of the cabinets.
• Remove all tape and packaging before using the
range. Destroy the packaging after unpacking the
range. Never allow children to play with packaging
material.
• Do not repair or replace any part of the appliance
4
unless speciically recommended in the manuals. All
other servicing should be done by a qualified techni-
cian. This may reduce the risk of personal injury and
damage to the range.
• Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.
• DO NOT LIFT RANGE BY DOOR HANDLE.
• Remove the door for easier handling and installation.
See "Removing Oven Door" in the Maintenance sec-
tion of the Use and Care Manual.
• Do not use the warming drawer (if equipped) or oven
for storage.
• Hidden surfaces may have sharp edges. Use caution
when reaching behind or under range.
Power Requirements and
Electrical Grounding Instructions
• Before installing, turn power OFF at the service
panel. Lock service panel to prevent power from be-
ing turned ON accidentally.
• Know how to disconnect the power to the range at
the circuit breaker or fuse box in case of an emer-
gency.