To Switch Time Zones; Heart Rate Data When Using Time Of Day Mode; Time Of Day Notes & Tips - Timex Ironman Race Trainer M175 Manual Del Usuario

Ocultar thumbs Ver también para Ironman Race Trainer M175:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting Group
Press START/SPLIT (+) or HEART RATE (-) to toggle between
the appearance options for the month and the day. The
Appearance of the
options include: Month Day (MM-DD) or Day Month
Month and Day
(DD.MM). For example, March 15 can appear as 3-15 (MM-
DD) or 15.3 (DD.MM).
Press START/SPLIT or HEART RATE to toggle between turning
Hourly Chime
the chime on and off. When turned on, the watch will emit a
beep every hour on the hour.
Press START/SPLIT or HEART RATE to toggle between turning
the button beep on and off. When you turn the button beep
Button Beep
on, the watch will emit a beep every time you press a button
other than the INDIGLO

To Switch Time Zones

The watch can track two time zones (T1 and T2). To look at the second
zone in Time of Day Mode, press START/SPLIT. T1 or T2 will flash in the
lower right corner indicating the alternate time zone. You can switch from
T1 to T2 or T2 to T1 by using these steps:
16
Adjustment
®
button.
1. Press and hold START/SPLIT until T1 or T2 appears and flashes.
2. Continue to hold until the time switches and the watch beeps.

Heart Rate Data When Using Time of Day Mode

When using the watch with the Heart Rate Sensor, you can change the
Time of Day Mode display by pressing the HEART RATE button. Choose
from:
1. Heart Rate over Time of Day;
2. Time of Day over Heart Rate
3. Heart Rate only; or
4. Day/Month/Date over Time of Day.
NOTE: While you can see current heart rate information in Time of Day
Mode, the watch is not collecting any data that you can view in Review
Mode.
Time of Day Notes & Tips
You can return to Time of Day Mode from any other mode on the watch
by pressing MODE until the time of day appears.
The watch does not automatically adjust for Daylight Savings Time.
When switching between Standard Time and Daylight Savings Time,
you must manually adjust the hour value.
At any time during the setting process, you can save your changes and
return to the main time display by pressing STOP/RESET/SET.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido