Assembly Instructions; Set Up Information / Batteries - Health O Meter 753KL Instrucciones De Uso

ASSEMBLY INSTRUCTIONS

Remove the display head and base from their respective cartons and packaging.
Model 753KL requires no assembly.
SET UP
Remove the protective film from the display window on the display head, then place the display module on a
table, desk or other flat surface. Place the base on the floor nearby.
Make certain that the base is on a stable, flat surface and that the sides of the base are clear of any
obstacles.
1. Place batteries in the battery holder (see "Replacing Batteries" information, below).
2. For AC operation – plug adapter into base of scale and into power source, or use the DC IN plug on
the back of the display module.
3. Turn scale on by pressing the ON/OFF button. The entire LCD display will light up, followed by the
version number, and then 0.0.
NOTE: If the set up procedure failed, refer to the troubleshooting instructions. If the
problem is not corrected, call Health o meter® Professional technical support at 1-800-
638-3722.
1. Turn the scale base upside
down. The battery holder is
located in the center of the
bottom of the base.
2. Slide the battery cover in the
direction of the "open" arrow.
Preparing the Scale for Use
Figure 1 – Replacing Batteries
Using the Keypad
KEY
FUNCTION
ON/OFF
Turns scale ON and OFF.
ZERO
Zeros the scale prior to weighing.
HOLD/RELEASE Does not function on this NTEP (legal for trade) scale.
KG/LB
Toggles between kilograms or pounds.
Scrolling method for entering height
▲
BMI
Prompts entry of height to calculate the Body Mass Index (BMI).
Scrolling method for entering height
▼
CLEAR
Functions as menu escape in BMI mode
ENTER
Used to accept height in BMI mode
- 4 -
3
3. Place the batteries into the
battery holder.
4. Replace the battery cover.
Note: We recommend
Energizer® e2™ batteries.