Machine Specifications; Delivery Scope Of The Complete System; Intended Use; Ce Declaration Of Conformity - Amann Girrbach 179560 Modo De Empleo

M A C H I N E S P E C I F I C A T I O N S
4

Machine Specifications

E N 4.1 Delivery scope of the complete sys-
tem
_ Desktop scanner
▪ USB cable
▪ Mains cable
▪ Operating Instructions
▪ USB stick with calibration data
▪ Calibration model
_ Additional accessories:
▪ M-Die
▪ All-in bar
▪ Universal plate
▪ Fixation spring lever
_ PC
▪ Windows operating system
▪ Mains cable (1 ×)
▪ Monitor (1 × display port cable, 1 × mains cable)
▪ Key board, mouse, headset
_ CAD software package
▪ CAD dongle
▪ Quickguide Installation
▪ CAD software CD
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.
4.2

Intended Use

The desktop scanner is a PC-controlled 3D scan-
ner for scanning dental tooth models.
NOTE:
The scan result depends on the materials being
scanned. Metal surfaces, for example, can lead
to artefacts. Scan spray can improve the scan
capability of materials.
30
The measuring accuracy of the scanner is
only guaranteed if the scanner is cali-
brated. A calibration model and the corre-
sponding standard values are included in
the delivery scope.
For improper use of the system, the manufacturer
shall not assume any liability whatsoever.
Unauthorised modifications/alterations of the
machine shall also void the warranty.
4.3

CE Declaration of Conformity

This product was designed and manufactured
based on careful selection of the harmonised
standards to be observed, as well as additional
technical specifications. It thus corresponds with
the state-of-the-art and ensures maximum safety.
In terms of design and performance, this product
complies with the European Directives and the
supplementary national requirements. Conform-
ity has been confirmed with the CE marking.
Applied harmonised
EC Directives standards
2006/42/EC DIN EN ISO 12100
DIN EN 13128
2004/108/EC DIN EN 61010-1
DIN EN 55011
DIN EN 61000-4-4
DIN EN 61000-4-5
Tab. 1
The product's declaration of conformity is availa-
ble upon request from the manufacturer.