6.5.2 Usage - Amann Girrbach 179560 Modo De Empleo

6.5.2 Usage

The models are scanned in two sequences:
_ Scanning of the upper and lower jaw models in
occlusion.
_ Scanning of the adjoining and freely-positioned
upper and lower jaw models in the All-In Bar.
Scanning the models in occlusion
The placement of the model on the univer-
sal plate should be performed outside of
the scanner.
▷ Centrally affix the model to be scanned with the
fixing spring lever (alternatively using a rubber
band) on the universal plate.
1
Fig. 28 Model in occlusion
1 Fixation spring lever
2 Triple-tray model
3 Abutment
4 Modelling wax
5 Universal plate
Always position models in such a manner
that they are within the scan focus.
▷ Position the universal plate into the scanner.
▷ Scan the models.
Scanning the freely-positioned models
The placement of the model on the univer-
sal plate should be performed outside of
the scanner.
▷ Insert the All-In Bar via the holding pins in the
respective holes of the universal plate.
Fig. 29 Mounting All-In Bar on universal plate
1 All-In Bar
2
2 Universal plate
▷ Fill compartments of the All-In Bar with model-
3
ling wax.
4
▷ Disassemble quadrant model in upper and lower
5
jaw.
▷ Remove abutment to be scanned.
▷ Affix abutment within the modelling-wax-filled
compartment.
A P P L I C A T I O N T I P S
E N
1
2
47