Humidistat/Electronic Controller Installation; Electrical Connection; Power Supply; Humidistat Connections - DST DR-40 T10 Manual Del Usuario

EN

4.5 HUMIDISTAT/ELECTRONIC CONTROLLER INSTALLATION

Install the humidistat/electronic controller away from the dry air out path to avoid false readings.

4.6 ELECTRICAL CONNECTION

Electrical components should be connected to the supply according to the local regulations and requirements.

4.6.1 POWER SUPPLY

The single-phase cable is to be directly connected to the power grid with earthing capability.
See electrical diagram for a electrical voltage and operation frequency.

4.6.2 HUMIDISTAT CONNECTIONS

See electrical diagram for connections.
Seibu Giken DST 12 DR-40 T10, T16 EN.03