Aim Of This Documentation; Accentuations In The Text; Intended Use; Hazardous Operating Conditions - DST DR-40 T10 Manual Del Usuario

1 SAFETY

1.1 AIM OF THIS DOCUMENTATION

This document is included at delivery and is therefore an integral part of the
equipment. It describes the machine's design and configuration at the time of
delivery.
In the interest of safety, please study this documentation before installing or
operating the equipment.
Instructions relating to safety, handling, operation and maintenance are to be
followed.
Noncompliance can result in serious personal injury or damage to the machinery
and may invalidate manufacturers' liabilities and warranties.
This documentation includes guidance for:
• Installers
• Operators
•
Please retain this documentation throughout the lifetime of the equipment.

1.2 ACCENTUATIONS IN THE TEXT

Caution!
Indicates "potentially" hazardous situations, which could result in
damage of the equipment, serious personal injury or death.
Indicates "imminently" hazardous situations, which could result in
damage of the equipment, serious personal injury or death.
Attention! Indicate important information or instruction that requires
special attention.

1.3 INTENDED USE

for any other use. For further advice please contact your DST representative.
• Conditioning of gases (other than air).
• Conditioning of air contaminated with chemicals or aggressive
elements.
•
• On rooms or air systems having a potentially explosive atmosphere
(ATEX).
• Conditioning of air at elevated pressures.
•
• Compounds in the air that will possibly deteriorate the silica gel rotor.
See appendix for detailed information.

1.3.1 HAZARDOUS OPERATING CONDITIONS

Operation of the system is deemed to be hazardous, if:
• Is not operated inside or is not protected within a weatherproof
enclosure.
• Is not operated within the permitted operating parameters (see
• Is operated outside the scope of 'normal' use (see intended use).

1.3.2 RESPONSIBILITIES OF THE OPERATOR

It is the responsibility of the operator of the system to ensure that all personnel
engaged with installation, operation, maintenance and service of the equipment
have read and understand the relevant sections of this manual.
For your own safety, wear the appropriate personal protective equipment (PPE).
DR-40 T10, T16 EN.03

1.3.3 MINIMISING HAZARDS

To ensure risk to personnel is minimised:
• Ensure that all activities relating to this equipment are carried out by
• Identify and prevent potential safety hazards in the environment.
To ensure a failure-free operation:
• Keep this manual ready to hand with the unit.
• Use the machine as intended only.
• Only use the machine if it is fully functional.
• Check the condition of the machine before using.
•
• Carry out maintenance and testing at the prescribed intervals.
1.4 SAFETY
This equipment conforms to the appropriate European regulations and directives
and is designed and manufactured to be safe and reliable in operation.
Continued safety and reliability is entirely dependent on correct handling,
installation, operation and maintenance of the equipment supplied.

1.5 INSPECTION OF GOODS

Check for transportation damage! Continue the use of this product only if you
assess it as being undamaged and faultless. Any damage must be recorded by
the forwarder at time of delivery and reported to the supplier of the equipment at the
earliest opportunity.
Please check condition of the equipment carefully for damage upon receipt and
after removal of all packaging.

1.6 SAFETY ADVICE REGARDING TRANSPORTATION

position the unit.
If a fork lift is used to move the unit, please ensure the load is
evenly balanced.

1.7 INSTALLATION

Attention! Installation, testing, commissioning preventative and corrective
of a qualified person. Wherever possible, all mechanical work must be
•
air conditioning plant and associated systems.
• Has completed the appropriate health and safety training.
• Has read and is familiar with the contents of this manual.
• Is professionally competent to commission and service this type of
equipment.
Caution! The air dryer is designed for internal installation. For external use
it will require a weatherproof enclosure.
Caution! The air dryer or rotor cassette requires installing on a horizontal
plane.
Attention! The air ducts must be vibration free and sizable enough to
prevent pressure build-up when conveying the incoming and outgoing air
from the unit. Do not support the full weight of the ducts onto the unit.
Attention! Wet air outlet duct must be insulated to prevent condensate and
ice build-up during cold conditions.
7
EN
Seibu Giken DST