Product Description; Product Overview; Applications; Principle Of Operation - DST DR-40 T10 Manual Del Usuario

EN

3 PRODUCT DESCRIPTION

3.1 PRODUCT OVERVIEW

1. Control panel
2. Process air in
3. Process air in
4. Wet air out
5.
6. Process fan
7. Rotor
8. Regeneration heater
9. Electrical cabinet
10. Rotor motor
11. Dry air out

3.2 APPLICATIONS

industries, or where a dry environment is required for storing and handling of moisture sensitive products and raw materials.

3.3 PRINCIPLE OF OPERATION

which is removed from the process air, is transferred over to the other as the rotor turns slowly.
1. Wet air outlet
2. Regeneration sector
3. Regeneration heater
4. Dry air outlet
5. Purge sector
6. Rotor motor
7. Process sector
8. Rotor
9. Process air fan
10. Process air inlet
RECUSORB
Seibu Giken DST
1
2
3
4
5
regeneration air, is used to heat the rotor material to drive the adsorbed moisture vapour from the desiccant. The moisture
2
1
9
10
6
8
11
7
3
8
5
6
7
10
10
9
process air, is dried as it passes
Warm air with Hot air with low
high humidty relative humidity
4
Water molecules
Humid air Dry air
Silica gel micropores
adsorbs the water molecules
DR-40 T10, T16 EN.03