Maintainer Without Needle Probe; Maintainer With Needle Probe - Bartscher XCH-050 Manual De Instrucciones

ENG
3. INSTRUCTIONS FOR USE AND MAINTENANCE
The appliance was designed to cook food and maintain the service tempera-
ture of foods indoors and should only be used for this function: Any other use
should be avoided as it is considered improper and dangerous. During opera-
tion, supervise the appliance.
3.1 Temperature maintainer without needle probe
1
1. Appliance start button.
2. Button for decreasing temperature.
3. Button for increasing temperature.
4. Cooking/maintenance Start/Stop button.
D. Display
Upon board activation(1) on display appears the cabinet set-point of 90°C.
The keys 2 and 3 allow the user to change the set temperature to minimum
25°C and maximum 120°C. Press the key 7 (Start), to enable the operation
and the device will be set to 'PRE' or pre-heating. At the end of the preheat-
ing procedure the machine emits a sound and immediately sets to 'HOLD'
at 'indefinite' time. If the room was already sufficiently preheated, the main-
tainer immediately sets to HOLD.
During the 'HOLD' phase, on display appears the temperature inside the
cabinet. Press the keys 2 and 3 to increase or decrease the maintenance
temperature.
3.2 Temperature maintainer with needle probe
1. Appliance start button.
2. Button for decreasing temperature.
3. Button for increasing temperature.
4. Core probe temperature button. (For models with needle probe only)
8
D
2
3
D
2
1
7
4
3 6
5
7