Super Ego 189 Manual De Usuario página 32

9. CHECK DAMAGED PARTS. Before any new use of an
electric tool, care should be taken in verifying that all
the protectors and other safety accessories are in order
to ensure that each one of these operate properly and
carry out their intended function. Verify the alignment
and fastening of the mobile parts and whether there
are broken parts, overlaps or any other condition
which could affect their functionality. Any guard or
other part that is damaged should be properly repaired
or replaced.
10. FEED DIRECTION OF THE PIECE TO BE
CUT. Only feed the material to be cut
towards a cutting blade or cutter in the
opposite rotation direction of the cutting
blade or cutter.
11. NEVER LEAVE AN ELECTRIC TOOL RUNNING
UNATTENDED. TURN POWER OFF. Do not leave an
electric tool unattended until it comes to a complete
stop.
12. MAKE SURE THE ELECTRIC TOOL IS
DISCONNECTED FROM THE MAINS POWER
SUPPLY while the motor is being mounted,
connected or reconnected.
1. GENERAL SAFETY RULES
32