Cutting Blade Tension; Cutting Blade Drag Mechanism; Tools - Super Ego 189 Manual De Usuario

7. OPERATING CONTROLS AND ADJUSTMENTS
Elements of Fig. 23 - 24
A: Cutting blade blocking guide fastening handle.
B: Fastening wheels for the cutting blade
C: Cutting blade
D: Recommended distance
E: piece to be cut

7.9 CUTTING BLADE TENSION

Rotate the knob (A) - (Fig. 25) clockwise to tighten the
blade on the wheels. Do not over-tighten.
Elements of Fig. 25 -
A: Tightening operator control of the cutting blade onto
the wheels.
7.10 CUTTING BLADE DRAG
MECHANISM
BAND SAW WITH VERY SHARP BLADE AND
POWERED UP.
An attempt to adjust the cutting blade may lead to
serious personal injuries from cuts.
To adjust the cutting blade, please contact qualified
service personnel.
A
Fig. 25
WARNING
43
The conveyance of the cutting blade was set at
the factory and should require no adjustment. Any
adjustment of the conveyance of the cutting blade must
be carried out by qualified personnel who are familiar
with this type of adjustments and the associated health
hazards.

7.11 TOOLS

Three Allen tools are available (Fig. 26) which allow for
the keys to be kept with which different adjustments can
be made to the band saw.
Fig. 26