Página 1
AUDIO CONTROL GROUP WITH ACCESS SELECTOR FOR AUDIO AND VIDEO WITH TELEPHONE SYSTEMS REF. A2410 GUÍA DE INSTALACIÓN INSTALLATION GUIDE...
Página 2
BUSY message while the busy line acoustic warning is given by group A2410. Viewer P2600 is connected to group A2410 by means of two connectors supplied with the viewer itself. The steps for installation are shown in the different...
Página 3
TELÉFONO ALFA T1150. ALFA TELEPHONE T1150. Door opener pushbutton. Supplementary pushbutton, potential-free contact. En el caso de portero, su funcionamiento es el It works in the following way in the case of an siguiente: entryphone: 1. When receiving a call, the telephone emits the call tone and call confirmation can be heard from the street panel.
Página 4
7. For other applications it has a supplementary potential-free pushbutton 8. It has brightness and colour adjustments to achieve an appropriate image quality. GRUPO CONTROL AUDIO A2410. AUDIO CONTROL GROUP A2410. The configuration options by means of micro-switches are the following: Microinterruptor 1 (MAIN / SEC): Micro-switch 1 (MAIN / SEC): This configures the street panel as Main (MAIN) or Secondary (SEC).
Página 5
14F of group A2410. The camera will receive power supply by connecting terminal block 14T of group A2410 to terminal block 14 of the camera. All A2410 groups in an installation will be connected to each other by means of terminal block 9.
Página 6
INSTALACIÓN PLACA DE CALLE. STREET PANEL INSTALLATION. Place the flush-mounted box. Separate the covers, unscrew both screws and extract module joints. Attach the street panel with Insert modules and joints in the Assemble upper two screws. same order as in the figure. frame and tighten the screws.
6bis Para apertura a la izquierda. To open towards the left. Unscrew right screw and loosen the left one. Move the street panel 1.5 mm to the right and the front. Open the street panel. Ajuste del volumen de placa calle y de monitor (1).
Página 8
COLOCACIÓN DE LOS TARJETEROS. PLACEMENT OF NAME TAGS. Insert the card. Insert in the Separate push-button module Extract the name card unit translucent until it clips in. from the push-button glass part. module of the street panel. The street panel is sufficiently protected against atmospheric conditions.
Página 9
INSTALACIÓN DEL TELÉFONO. INSTALLATION OF TELEPHONE. Attachment to wall with Open the base of the sleeper-screws and cable Assembly of the casing, first telephone by inserting the connection. adjusting the upper stops to screwdriver in the gap and the press on the lower part. levering.
Página 10
Remember 14 is the maximum number of accesses that can be managed with A2410 audio control groups in the same installation. The common audio and power supply wires can start towards dwellings from any street panel of the installation. However, rise video...
Página 11
ESQUEMA CONEXIONES INSTALACIÓN AUDIO CON 2 ACCESOS. CONNECTION DIAGRAM OF AUDIO INSTALLATION WITH 2 ACCESSES. T1150 POWER SUPPLY CABLE SIGNAL CABLE TELEPHONE n T1150 TELEPHONE 1 F1318 F1318 Group A2410 configuration. Group A2410 configuration. A2410 A2410 P2600 P2600 G02XX G02XX ACCESS A ACCESS A...
Página 12
ESQUEMA UNIFILAR VíDEO. SINGLE WIRE VIDEO DIAGRAM. n= No. of dwellings Video signal distributor Coaxial or Twisted pair Distributor power supply Coaxial or Twisted pair Coaxial or Twisted pair Coaxial or Twisted pair Board 1 Board 2 Board 14 TABLA DE SECCIONES PARA INSTALACIONES DE VÍDEO. SECTION TABLE FOR VÍDEO INSTALLATIONS.
Página 13
CONNECTION DIAGRAM OF VIDEO INSTALLATION WITH 2 ACCESSES. POWER SUPPLY CABLE. SIGNAL CABLE. 75 Ohm COAXIAL CABLE. M1720D F1320 F1318 M1720D F1318 Configuration for Configuration for Group A2410 Group A2410 coaxial cable. coaxial cable. configuration. configuration. G1820D G1820D A2410 A2410 P2600 P2600...
Página 14
ESQUEMA CONEXIONES PLACAS CALLE EN INSTALACIÓN DE VÍDEO CON m ACCESOS. CONNECTION DIAGRAM OF STREET PANELS IN VIDEO INSTALLATION WITH m ACCESSES. ACCESS m POWER SUPPLY CABLE. SIGNAL CABLE. Configuration for Group A2410 coaxial cable. 75 Ohm COAXIAL CABLE. configuration. G1820D A2410 P2600 G02XX...
Página 15
FUNCIONALIDAD DE LA BORNA 9E. FUNCTION OF TERMINAL BLOCK 9E. Terminal block 9E of A2410 groups is used in installations with several blocks of dwellings with common accesses to all of them. As many street panels are installed in common accesses as blocks Las placas calle of dwellings there are in the installation.
Página 16
CONFIGURACIÓN TELECÁMARA. CAMERA CONFIGURATION. Configuration for video installations with 75 ohms coaxial cable. Configuration for video installations with category 5 twisted pair cable (100 ohms). CONFIGURACIÓN BASE MURAL PARA MONITOR. CONFIGURATION OF WALL BASE FOR MONITOR. VIDEO ENDING RESISTANCE: 75 ohms: COAXIAL 100 ohms: TWISTED PAIR NO RESISTANCE: The monitor is not the last one along the video line.
Página 17
INSTALACIÓN TELÉFONO SUPLETORIO. INSTALLATION OF A SUPPLEMENTARY TELEPHONE. T1150 POWER SUPPLY CABLE. SIGNAL CABLE. 75 ohm coaxial or cat. 5 twisted pair cable. M1720D From camera INSTALACIÓN MONITOR SUPLETORIO. INSTALLATION OF A SUPPLEMENTARY MONITOR. POWER SUPPLY CABLE. Coaxial SIGNAL CABLE. Twisted pair 75 ohm coaxial or cat.
Página 18
EJEMPLO DE DISTRIBUCIÓN DE SEÑAL DE VÍDEO EN CASCADA. EXAMPLE OF RISE VIDEO SIGNAL DISTRIBUTION. Special care must be taken when configuring the bridge in each wall base (see page 16). Coaxial Twisted pair 75 ohm coaxial or cat. 5 twisted pair cable. From camera group G1820D or video signal distributor output.
Página 19
EJEMPLO DE DISTRIBUCIÓN DE SEÑAL DE VÍDEO EN INSTALACIÓN DE COAXIAL CON DISTRIBUIDORES. EXAMPLE OF VIDEO SIGNAL DISTRIBUTION IN A COAXIAL CABLE INSTALLATION WITH DISTRIBUTORS. Specific 4-branch distributors, ref. M1934 for 75 ohm coaxial cable will be used. Special care must be taken when configuring the bridge in each wall base (see page 16). The closure resistance will be cut in all distributors in which the video cable enters and exits towards another distributor.
Página 20
EJEMPLO DE DISTRIBUCIÓN DE SEÑAL DE VÍDEO EN INSTALACIÓN DE PAR TRENZADO CON DISTRIBUIDORES. EXAMPLE OF VIDEO SIGNAL DISTRIBUTION IN A TWISTED PAIR INSTALLATION WITH DISTRIBUTORS. Specific 4-brach distributors ref. M1924 twisted pair cable will be used. Special care must be taken when configuring the bridge in each wall base (see page 16). The closure resistance will be cut in all distributors in which the video cable enters and exits towards another distributor.
Página 21
The LED is off: Group A2410 is idle. The LED is on without blinking: Group A2410 is active, that is to say, there is a call in progress. The LED blinks at 1 second interval: It is a main panel with a secondary panel that is active.
Página 22
PROBLEMA POSIBLE FALLO PROBLEM POSSIBLE FAULT Hay distorsión en la imagen del monitor o esta aparece en blanco. There is a distortion in the image Check the connection of the video signal cable (coaxial or twisted pair) on the monitor or this appears and its distribution.