Surface Burners; Data Rating Label - Thermador PROFESSIONAL PRO GRAND Serie Manual De Usuario

Ocultar thumbs Ver también para PROFESSIONAL PRO GRAND Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT: Always remove the oven racks before
self-cleaning the oven. If the gliding racks remain in
the oven during Self-Clean, lubricants in the glide
mechanisms of each rack will be lost and the finish will
discolor.
ALWAYS REMOVE BEFORE SELF CLEAN

Surface Burners

1. Ensure that the burner caps are correctly seated on
the burner bases of the range's cooktop (see
2. Turn on each burner to check for proper flame color.
See
Oven Operation
1. Before baking or broiling, the oven and broiler should
be turned on to burn off the manufacturing oils using
one of the two following methods:
Turn on kitchen ventilation (or if vent hood is a
recirculation type open a window). Set oven at
500ºF (260ºC) and let the oven go through a 2 hour
cycle at high heat then shut off the oven. Please
read
cleaning the oven racks.
Turn on kitchen ventilation (or if vent hood is a
recirculation type open a window). Remove oven
racks. Set oven into self-clean cycle and let self-
clean run (see
).
Before You Begin
Figure 6: Full Access Oven Rack
).
for details.
before
Please note that some pets or humans can be sensitive to
the odors created during the self-cleaning process whether
it is a manufacturing residue burn off or food, so it is
recommended that those potentially affected be removed
from the kitchen area during the self-clean process.
The THERMADOR PROFESSIONAL
has a smell or smoke when first used. These smells or
smoke come from the burning off of manufacturing
residues and is typical of any new oven regardless of
manufacturer.
Please read "Care and Maintenance" on page 36 before
cleaning the oven racks.
NOTE: It is normal for the cooling process to push heated
air out into the room when the oven is on.

Data Rating Label

Record the Model and Serial number on page 44. See
"Data Rating Labels" found on the Rating Label Plate. The
Rating Label Plate is located on the right side of the range
between the oven cavity and side panel (see
). These may be used for any future contacts with
Customer Service. Enter this information on the Product
Registration Card included with this product then mail it to
the indicated address.
®
range occasionally
English 12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido