Peltor WS Serie Manual Del Usuario página 5

Quick guide for synchronising (pairing) the WS Alert headset
Bluetooth unit with a mobile telephone
1. Turn all WS Alert headset functions OFF. (If necessary, remove
and re-install batteries.)
2. Press and hold the Bluetooth button on the left cup for 6 se-
conds.
3. Search for the new Bluetooth unit, Peltor WS4, according to your
telephone's directions for use.
4. Press and hold the Bluetooth button for 6 seconds until the LED
glows red.
Activation
5. Activate the Bluetooth function by pressing and holding the
Bluetooth button on the left cup for 2 seconds.
6. Activate the radio or the surround sound function on the right
cup.
Turning off
7. Turn off any of the three functions separately.
(C)
Usage time, WS Alert headset
Mode
All functions turned off
Bluetooth only, standby
Bluetooth only, active
Surround+bluetooth, standby
Radio+bluetooth, standby
Surround+radio+Bluetooth, standby
Surround+bluetooth, active
Radio+bluetooth, active
Surround+radio+Bluetooth, active
All calculations are based on
a 2500 mAh battery
operating Current
time consumption
hours mA
(average) (average)
- 0
342 7
43 55
133 18
48 50
41 58
35 67
24 100
23 102