Operating Manual Unlocking - Vimar Elvox ESM7 ACTO 404D Manual Para El Conexionado Y El Uso

Fig. 4
Fig. 5 Fig. 6
45 mm
45 mm
Installing the foundation plate in the finished flooring
For floors made of concrete (or similar material), you can secure the plate directly to the ground:
1 - Obtain suitable fastening systems, commonly found on the market, such as steel anchor bolts (Figure 11) or expansion anchors to be inserted with a few
blows of a hammer.
2 - Observing the distances indicated above, draw the drilling points using the plate as a guide, drill 4 holes of 10 mm in diameter and secure the plate,
making sure that the threaded bar protrudes by at least 25mm as shown in Figure 12.
3 - In some cases (rack already installed, possible stagnation of water, etc.) you can secure the plate in a raised position off the floor by a maximum of 20mm,
by placing 4 nuts and their washers under the plate as shown in Figure 13. In this case, the pins must protrude from the ground by at least 45mm.
N.B.: Make sure the floor is level and suitable for fixing with plugs. Regardless of the chosen fastening system, the plate must be securely fastened, perfectly
level and parallel to the gate leaf.
EN
30 mm
30 mm
Fig. 7
F
R
D
Fig. 8
Fig. 9
Fig. 10
25 mm
Max 20 mm
17