8
1) Coin insert slot: The coin insert slot positioned below the display is used by the user to introduce the
amount required to buy the product.
2) Machine status warning lights : lights positioned on the machine door (next to the coin return button
indicate the status of the distributor: green light: the machine is ready to operate; red light: the change-
giving tubes are empty (if the machine be equipped with a change-giving coin mechanism) and therefore
the articles may only be purchased by inserting the correct amount of money.
3) Coin return push-button: the coin return push-button is used for recovering coins stuck in the coin
mechanism.
4) Selection push-button panel: it is placed under the coin return push-button and it consist of a switch
set identified by numbers. To select settle the number which corresponds to the wanted product.
5) Operating instructions: the instructions panel is situated under the lights and the coin return push-
E
button; it instructs the user in the correct procedure for operating the machine.
N
6) Delivery door: a spring loaded flap which is pushed open by the customer to collect his purchases.
G
7) Return coin cup: Rejected coins are returned to this point and any change given may be collected from
L
here.
I
S
H
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
4
DOOR LAYOUT (FIG. 1)
FIG. 1
480 Budget - Issue 00