Cabinet Layout (Fig. 2) - FAS 480 BUDGET Manual Del Usuario

480 Budget - Issue 00
1) Refrigeration unit: The refrigeration unit mounted in the cabinet base maintains the products at the
correct temperature. The defrost cycle is carried out automatically every 6 hours.
2) Motor gearbox unit: It is also mounted in the cabinet base and it causes the drum column to rotate.
3) Solenoids: The solenoids mounted on the inside of the cabinet withdraw the selected plate and allow the
drum to rotate.
4) Control box: The electrical control box in the cabinet base supplies power to all electrical circuits in the
machine and contains the main switch, the fuses and the power card.
5) Evaporator unit: it is mounted on the cabinet base and consists of two tangential ventilators, the
evaporator and a tray mounted under the evaporator to collect moisture.
6) Lighting: There are two fluorescent lamps, one mounted on the door and the other inside the cabinet.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
5

CABINET LAYOUT (FIG. 2)

FIG. 2
9
E
N
G
L
I
S
H