Changing The Number Of Compartments - FAS 480 BUDGET Manual Del Usuario

22

10.3 CHANGING THE NUMBER OF COMPARTMENTS

1) Open the main door to access the drum column.
2) Unhook the lefthand front grate in steel ref.B fig.10.
3) To add dividers, insert the divider blades into the central hub of the drum fig. 11.
4) Rotate the drum below the one being modified to aligne the large diameter hole of the upper ring with the
blade to add fig. 12.
5) Insert the connecting rod through the large hole and tighten up using the special spanner provided with
each machine.
6) For the bottom drum use the hole on the cabinet floor ref. A fig. 10, after having taken position as to it.
7) Clamp the dividers in the same way.
8) Plug all the holes which have to be closed, as shown in fig. 9
9) Replace the lgrate in stainless steel.
E
10) Adjust the sliding plates as to the created spaces as previously described in paragraph "SELECTION
N
COMPARTMENTS" and as schematized in fig. 7 ref A.
G
L
N.B. All these procedures can be facilitated removing the drums from the machine as described in the
I
following paragraph.
S
H
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
FIG. 11
FIG. 10
FIG. 12
480 Budget - Issue 00