Tabla De Contenido; Receiving And Uncrating; How To Order Replacement Parts - HYTROL ABLR Manual De Instalación Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TABLE OF CONTENTS
INTRODUCTION
Receiving and Uncrating . . . . . . . . . . . . . . . . . . . .2
How To Order Replacement Parts . . . . . . . . . . . .2
Installation/Operation. . . . . . . . . . . . . . . . . . . . . . .3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Support Installation . . . . . . . . . . . . . . . . . . . . . . . .4
Ceiling Hanger Installation . . . . . . . . . . . . . . . . . .4
Conveyor Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . .4
Squaring Sections . . . . . . . . . . . . . . . . . . . . . . . . .4
Belt Installation . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . .5
Belt Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6
Tread Roller Installation . . . . . . . . . . . . . . . . . . . .6
Pressure Adjustment . . . . . . . . . . . . . . . . . . . . . . .6
Conveyor Start-Up. . . . . . . . . . . . . . . . . . . . . . . . .7
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Drive Chain Alignment and Tension . . . . . . . . . . .7
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . .8
Maintenance Checklist . . . . . . . . . . . . Back Cover
REPLACEMENT PARTS
Model ABLR Parts List . . . . . . . . . . . . . . . . . . . . .8
Model ABLR Parts Drawing. . . . . . . . . . . . . . . . . .9
Spanish Version . . . . . . . . . . . . . . . . . . . . . . 11
INTRODUCTION
This manual provides guidelines and procedures for installing, operating,
and maintaining your conveyor.
recommended spare parts highlighted in gray. Important safety information is
also provided throughout the manual. For safety to personnel and for proper
operation of your conveyor, it is recommended that you read and follow the
instructions provided in this manual.

• Receiving and Uncrating

1. Check the number of items received against the bill of lading.
2. Examine condition of equipment to determine if any damage
occurred during shipment.
3. Move all crates to area of installation.
4. Remove crating and check for optional equipment that may be fastened to
the conveyor. Make sure these parts (or any foreign pieces) are removed.
NOTE: If damage has occurred or freight is missing,
Contact your Hytrol Integration Partner.

• How to Order Replacement Parts

Included in this manual are parts drawings with complete replacement parts
lists. Minor fasteners, such as nuts and bolts, are not included.
When ordering replacement parts:
1. Contact Dealer from whom conveyor was purchased or nearest HYTROL
Integration Partner.
2. Give Conveyor Model Number and Serial Number or HYTROL Factory
Order Number.
3. Give Part Number and complete description from Parts List.
4. Give type of drive. Example-8" End Drive, 8" Center Drive, etc.
5. If you are in a breakdown situation, tell us.
Hytrol Conveyor
Company, Inc.
JONESBORO, ARKANSAS
SERIAL #
2
A complete parts list is provided with
QR
CODE
YEAR
123456

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido