Introduction; Included In Delivery; Installing; General - Vetus CCM Manual De Manejo Y Instrucciones De Instalación

1 Introduction

The Vetus instrument CCM is a combined control panel / chain counter for use with the
Vetus electrical anchor windlass Napoleon.
Warning
The instrument is only suitable for use with direct current.

2 Included in delivery

- Instrument

- Gasket
- Protective cover
- 4 fixing screws (length 13 mm)
- Current sensor
- 10-pole connector, with cable
- Instruction manual

3 Installing

3.1 General

The Vetus instrument CCM is only suitable for connecting to the Vetus electrical anchor
windlass Napoleon. The instrument must be connected to the chain sensor already fitted
in the Vetus electrical anchor windlass Napoleon.
The current sensor still needs to be fitted on the main current cable to the anchor wind-
lass motor.
3.2 Instrument
Warning
Make sure that the battery is disconnected when the instrument is connected.
• The instrument must be installed in such a way that the screen can be read easily. Do
not install the instrument in direct sunlight.
• The back of the instrument must be protected from moisture (water).
Control panel / chain counter CCM
ENGLISH
17
060123.01