[Light] Button - Coway AIRMEGA 400S Manual De Instrucciones

02 PREPARATION
Control Panel (400S/400)
400S
[Wi-Fi] button/indicator
Touch this button to connect to a Wi-Fi
network. When the Wi-Fi connection is
completed, the indicator is turned on.
* The status of Wi-Fi LED :
- Blinking : Not connected yet or in the
pairing process
- Constant LED: Wi-Fi connected
- LED off: Wi-Fi off
400
[Timer] button/indicator
Touch this button to automatically turn
off after an hour, 4 hours, or 8 hours.
NOTE
For 400S users, you can set the timer
and scheduler using Airmega mobile
application.
[Pre Wash] button/indicator
Shows the pre-filter cleaning cycle at 5 levels
(100 %, 80 %, 60 %, 40 %, 20 %, 0 %). When the
letters on button is lit, it indicates that
the pre-filters need to be cleaned.
* A fter cleaning the pre-filters, touch and hold
this button for 2~3 seconds to reset the indicator.
[Max2 Change] button/indicator
Shows the Max2 filter lifetime at 5 levels
(100 %, 80 %, 60 %, 40 %, 20 %, 0 %). When the
letters on button is lit, it indicates that the Max2
filters need to be replaced.
* A fter replacing the Max2 filters, touch and hold
this button for 2~3 seconds to reset the indicator.
10
Checking the product

[Light] button

Touch this button to turn the air
quality indicator and light on or off.
Light sensor
This sensor detects the intensity
of light. When the product is set to
Smart mode and it is dark,
for 3 minutes, the product enters
Sleep mode automatically.
However, if the air speed is set
manually or pollution level is
above normal (in Smart mode),
Sleep mode will not be activated
automatically.