Maintenance; Filter Maintenance And Cleaning Parts - Coway AIRMEGA 400S Manual De Instrucciones

05 MAINTENANCE

Filter Maintenance and Cleaning Parts

Clean the pre-filters and each part of the main unit and replace the Max2 filters regularly for optimum performance.
The following tables show the recommended maintenance cycle for filters and cleaning cycle for each part.
Maintenance Filter
Pre-filters*
Max2 filters*
* After cleaning or replacing the filters, make sure to reset the filter indicator on the control panel. (P. 25 P. 24)
** 400S/300S: Approximately 2 weeks (based on daily 8 hours usage at max speed)
Filter cleaning cycle can be adjustable in the smart phone application .
400/300: Approximately 2 weeks (based on daily 8 hours usage at max speed)
*** Approximately 12 months (based on daily 8 hours usage at max speed)
The filter lifetime may differ depending on the real running time of product and the fan speed. The figures above are
evaluated on a general basis.
Cleaning Parts
Front, left, and right cover
Air outlet
Pollution sensor
CAUTION
• Be sure to turn off the power and disconnect the power plug before cleaning each part or replacing the Max2 filters.
• Do not use detergents that contain solvents, thinners, bleach, chlorine, or abrasives.
• Do not immerse the product in water or spray the product with water.
• If you use water to clean the pre-filter, dry the pre-filter in the shade before re-installing it.
NOTE
• If you are using the product in a polluted environment, clean each part or replace the Max2 filters more frequently
than the recommended cycle.
• Using a Airmega genuine filter is recommended for optimum performance.
• The Max2 filters are not reusable. Do not try to clean them with water. Always replace them with a new one.
• When disposing of the old Max2 filters, follow your local regulations.
Exterior
24
Maintenance Cycle
Cleaning the filters whenever the filter indicator is on**
Replacing the filters whenever the filter indicator is on***
Cleaning Cycle
Every 2 months (recommended)
Wipe the exterior of the product with a soft
dry cloth.
When the exterior is dirty, use a slightly damp
cloth.