Battery Replacement; Customer Service - Klein Tools Ranger TDR Manual De Instrucciones

ENGLISH
Remove single screw in the middle of the back of the Ranger™ TDR
1.
with a #1 Phillips head screwdriver. Remove battery door.
2. Remove and recycle exhausted batteries.
3. Acquire 4 AA 1.5V alkaline batteries (IEC LR6, ANSI/NEDA 15A).
Insert batteries into the battery compartment observing the polarity
4.
marked inside the case.
5. Replace battery door and screw, taking care not to over-tighten it.
This product is warranted to be free from defects in materials and work-
manship for a period of two years from the date of purchase. During this
warranty period, Klein Tools has the option to repair or replace or refund
the purchase price of any unit which fails to conform to this warranty
under normal use and service. This warranty does not cover dam-
age which occurs in shipment or failure which results from alteration,
tampering, accident, misuse, abuse, neglect, or improper maintenance.
Batteries and damage resulting from failed batteries are not covered by
warranty. A purchase receipt or other proof of original purchase date will
be required before warranty repairs will be rendered.
Any implied warranties, including but not limited to implied warranties
of merchantability and fi tness for a particular purpose, are limited to the
express warranty. Klein Tools shall not be liable for loss of use of the
instrument or other incidental or consequential damages, expenses, or
economic loss, or for any claim or claims for such damage, expenses or
economic loss.
Some states or countries laws vary, so the above limitations or exclu-
sions may not apply to you. This warranty gives you specifi c legal rights,
and you may also have other rights which vary from state to state. If
your Klein product requires repair or for information on how to exercise
your rights under the terms of this warranty, please contact Klein Tools
at 1-800-553-4676.
Turn instrument off and disconnect any cables. Clean the instrument by
using a damp cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity. After a
period of storage in extreme conditions exceeding the limits mentioned
in the Specifi cations section, allow the instrument to return to normal Specifi cations section, allow the instrument to return to normal Specifi cations
operating conditions before using it.
This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct disposal.
KLEIN TOOLS, INC.
14

BATTERY REPLACEMENT

WARRANTY
CLEANING
STORAGE
DISPOSAL / RECYCLE

CUSTOMER SERVICE

• 450 Bond Street • Lincolnshire, IL 60069
1-800-553-4676 • www.kleintools.com