Gewiss CHORUS GW 16 974CB Manual De Programación página 48

Pages relating to the thermostat (control type: HVAC)
USER INSTRUCTIONS
Choosing the HVAC mode (pre-comfort, comfort,
economy or OFF)
It the type of control set is in HVAC mode, press the
button key to select the desired HVAC mode
, ,
(
Each time the
selected HVAC mode is shown for a moment.
If the device is configured as a Slave, no local modification
of the HVAC mode is allowed; manual switch off HVAC OFF
is allowed, provided that it is configured with Easy Controller,
whilst for ETS it must be authorised.
Forcing the set-point manually
If any HVAC mode other than OFF is active, by actioning the
circular touch slider it is possible to temporarily change the
setpoint of the active HVAC mode (within the limits of the
regulation interval imposed by ETS) and then confirm this
with the button key, or wait until the 5 seconds timeout
has expired. The use of forcing is indicated by the
and it remains active until the active HVAC mode is changed.
48
or OFF).
button key is pressed, the setpoint of the
icon