Gewiss CHORUS GW 16 974CB Manual De Programación página 62

USER INSTRUCTIONS
Setting the integration time
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust
using the circular touch slider or the push-button
value of the integration time of the proportional integral
control algorithm for heating or cooling (range can be set
from 1 to 250 seconds, "no"), depending on the type of
operation selected. The "no" value excludes the integral
component from the control algorithm, which then becomes
a pure proportional control. To confirm the set value, press
the button key within thirty seconds; expiry of the
timeout (30 seconds) or pressing the push-button
in exiting the change page without saving it.
Setting a command sending variation
Press the button key to access value change; after the
access, the current parameter value is displayed. Change
through the circular touch slider or the push-button
minimum percentage value for issuing the command of the
integral proportional continuous control algorithm (possible
values are: 1, 2, 3, 4, 5, 10, 20%) for heating
, depending on the type of operation set. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button result in exiting the change page without saving
it.
62
button key within thirty seconds;
the
result
the
or cooling