The proximity sensor activates the back-lighting of the push-buttons and the touch slider.
If the sensor is enabled, the back-lighting is activated when the user approaches the
thermostat; on the contrary, if the sensor is disabled, the back-lighting is activated when
the push-button or touch slider is used. The back-lighting is automatically deactivated if
the thermostat is left unused for more than 30 seconds.
The setting of "advanced" thermostat parameters is now complete. Press the
key to return to normal operation.
USER INSTRUCTIONS
Humidity threshold 5
Press the
button key to access value change; after the
access, the current parameter value is displayed. Adjust the
humidity threshold value 5 (range can be set from 1% to
100%) using the circular touch slider or the
button. The parameter is only displayed if the threshold has
been activated from ETS or Easy Controller. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button
result in exiting the change page without saving
it.
Activating the proximity sensor
Press the
button key to access value change; after the
access, the current parameter value is displayed.
Activate/deactivate the proximity sensor of the thermostat
(0= disabled; 1 = enabled) via the circular touch slider or
the
push-button. To confirm the set value, press the
button key
within thirty seconds; expiry of the time-out
(30 seconds) or pressing the push-button
exiting the change page without saving it.
73
button key within thirty seconds;
push-
E
N
G
L
I
S
H
result in
button