Gewiss CHORUS GW 16 974CB Manual De Programación página 72

USER INSTRUCTIONS
Humidity threshold 2
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
humidity threshold value 2 (range can be set from 1% to
100%) using the circular touch slider or the
button. The parameter is only displayed if the threshold has
been activated from ETS or Easy Controller. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button result in exiting the change page without saving
it.
Humidity threshold 3
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
humidity threshold value 3 (range can be set from 1% to
100%) using the circular touch slider or the
button. The parameter is only displayed if the threshold has
been activated from ETS or Easy Controller. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button result in exiting the change page without saving
it.
Humidity threshold 4
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
humidity threshold value 4 (range can be set from 1% to
100%) using the circular touch slider or the
button. The parameter is only displayed if the threshold has
been activated from ETS or Easy Controller. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button result in exiting the change page without saving
it.
72
button key within thirty seconds;
button key within thirty seconds;
button key within thirty seconds;
push-
push-
push-