Gewiss CHORUS GW 16 974CB Manual De Programación página 66

USER INSTRUCTIONS
Setting the speed adjustment differential 2
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust
using the circular touch slider or the push-button
heating or cooling
speed 2 of the fan coil control algorithm (range can be set
from 0,1°C to 2,0°C), depending on the type of operation
selected. If the device is configured in ETS, this parameter
is visible only if the fan coil speed number is higher than 1.
To confirm the set value, press the
thirty seconds; expiry of the timeout (30 seconds) or
pressing the push-button
page without saving it.
Setting the speed adjustment differential 3
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust
using the circular touch slider or the push-button
heating or cooling
speed 3 of the fan coil control algorithm (range can be set
from 0,1°C to 2,0°C), depending on the type of operation
selected. If the device is configured in ETS, this parameter
is visible only if the fan coil speed number is 3. To confirm
the set value, press the
seconds; expiry of the timeout (30 seconds) or pressing the
push-button result in exiting the change page without
saving it.
66
adjustment differential of the
button key within
result in exiting the change
adjustment differential of the
button key within thirty
of the
of the