Weinmann CPAP 20e Descripción Del Aparato E Instrucciones De Manejo página 27

Caution!
• Make sure no liquid gets into the pressure glands. This may cause
the unit to malfunction.
Wipe down the unit, the power supply and the power supply cable with a damp,
soft cloth.
The CPAP 20e must be completely dry before starting up.
Cleaning the coarse dust filter/changing the fine filter
Accessories
To clean the exhalation system, the mask and the headgear, please see the section
"Cleaning" in the relevant operating instructions.
To clean the humidifier CLICK 2, please see the section "5.3 Cleaning CLICK 2"
on page 28 of these operating instructions.
1. Remove the coarse dust filter and clean under
fresh running water until no residues remain.
2. Replace the fine filter if necessary, as it cannot
be cleaned.
3. Let the coarse dust filter dry.
Before start up, the coarse dust filter must be
completely dry.
4. Replace the coarse dust filter.
Hygienic preparation
EN
27